Recalls for 2006 Mazda Tribute

There are currently 4 recalls for your car.


What Should You Do?

Bring your car to a dealer immediately. Recalls are issued because the defect might make the car unsafe in some way. Your nearby service center can help verify if the repairs can be performed free of charge.

Contact a Service Center

NHTSA Vehicle Safety Recalls


Recall Number: 15E045000

Recall Date: 06/03/2015

Component: SUSPENSION:FRONT:WHEEL BEARING

Problem Summary: The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.

Consequence: Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.

What Owners Should Do: Timken has begun notifying distributors who will offer purchasers replacement wheel bearings, free of charge. The recall began on May 21, 2015. Owners may contact Timken customer service at 1-866-984-6536.

Next Steps: Contact a Service Center Near You

Recall Number: 12V357000

Recall Date: 07/27/2012

Component: VEHICLE SPEED CONTROL:CABLES

Problem Summary: MAZDA IS RECALLING CERTAIN MODEL YEAR 2001 THROUGH 2006, AND 2008, TRIBUTE VEHICLES EQUIPPED WITH 3.0L V6 ENGINES AND SPEED CONTROL. INADEQUATE CLEARANCE BETWEEN THE ENGINE COVER AND THE SPEED CONTROL CABLE CONNECTOR COULD RESULT IN A STUCK THROTTLE WHEN THE ACCELERATOR PEDAL IS FULLY OR ALMOST-FULLY DEPRESSED. THIS RISK EXISTS REGARDLESS OF WHETHER OR NOT SPEED CONTROL (CRUISE CONTROL) IS USED.

Consequence: A STUCK THROTTLE MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP OR SLOW THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.

What Owners Should Do: MAZDA WILL NOTIFY OWNERS, AND DEALERS WILL REPAIR THE VEHICLES BY INCREASING THE ENGINE COVER CLEARANCE, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON, OR BEFORE, AUGUST 6, 2012. REMEDY PARTS ARE EXPECTED TO BE AVAILABLE IN MID-AUGUST 2012. UNTIL THEN DEALERS WILL DISCONNECT THE SPEED CONTROL CABLE AS AN INTERIM REMEDY, IF PARTS ARE NOT AVAILABLE AT THE TIME OF AN OWNER'S SERVICE APPOINTMENT. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500, OPTION #6.

Next Steps: Contact a Service Center Near You

Recall Number: 12V357000

Recall Date: 07/27/2012

Component: ENGINE AND ENGINE COOLING

Problem Summary: MAZDA IS RECALLING CERTAIN MODEL YEAR 2001 THROUGH 2006, AND 2008, TRIBUTE VEHICLES EQUIPPED WITH 3.0L V6 ENGINES AND SPEED CONTROL. INADEQUATE CLEARANCE BETWEEN THE ENGINE COVER AND THE SPEED CONTROL CABLE CONNECTOR COULD RESULT IN A STUCK THROTTLE WHEN THE ACCELERATOR PEDAL IS FULLY OR ALMOST-FULLY DEPRESSED. THIS RISK EXISTS REGARDLESS OF WHETHER OR NOT SPEED CONTROL (CRUISE CONTROL) IS USED.

Consequence: A STUCK THROTTLE MAY RESULT IN VERY HIGH VEHICLE SPEEDS AND MAKE IT DIFFICULT TO STOP OR SLOW THE VEHICLE, WHICH COULD CAUSE A CRASH, SERIOUS INJURY OR DEATH.

What Owners Should Do: MAZDA WILL NOTIFY OWNERS, AND DEALERS WILL REPAIR THE VEHICLES BY INCREASING THE ENGINE COVER CLEARANCE, FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON, OR BEFORE, AUGUST 6, 2012. REMEDY PARTS ARE EXPECTED TO BE AVAILABLE IN MID-AUGUST 2012. UNTIL THEN DEALERS WILL DISCONNECT THE SPEED CONTROL CABLE AS AN INTERIM REMEDY, IF PARTS ARE NOT AVAILABLE AT THE TIME OF AN OWNER'S SERVICE APPOINTMENT. OWNERS MAY CONTACT MAZDA CUSTOMER ASSISTANCE CENTER AT 1-800-222-5500, OPTION #6.

Next Steps: Contact a Service Center Near You

Recall Number: 05V525000

Recall Date: 11/17/2005

Component: VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR

Problem Summary: ON CERTAIN TRUCKS AND SPORT UTILITY VEHICLES, THE WINDSHIELD WIPER MOTOR MAY HAVE BEEN PRODUCED WITHOUT GREASE APPLIED TO THE OUTPUT SHAFT GEAR.

Consequence: AFTER A PERIOD OF CONTINUOUS USE ON THE HIGH SPEED SETTING, LACK OF GREASE ON THE OUTPUT SHAFT GEAR MAY CAUSE THE GEAR TEETH TO DISTORT OR FRACTURE DURING OPERATION RESULTING IN THE LOSS OF WIPER FUNCTION. INOPERATIVE WIPERS UNDER INCLEMENT WEATHER CONDITIONS COULD CAUSE A CRASH DUE TO IMPAIRED VISIBILITY.

What Owners Should Do: DEALERS WILL INSPECT THE WIPER MOTOR FOR THE PRESENCE OF GREASE AND GREASE THE WIPER MOTOR GEARS IF NECESSARY. THE RECALL BEGAN ON NOVEMBER 28, 2005. OWNERS MAY CONTACT MAZDA AT 1-800-222-5500.

Next Steps: Contact a Service Center Near You

Certified Service Centers

Certification requires warranty on parts and labor, fair-price* guarantee, certified technicians and high customer satisfaction ratings.

*Fair prices, measured by comparing them to the RepairPal Price Estimator.

Additional terms and conditions apply