1998 Chevrolet Tahoe Recalls

There are currently 4 recalls for your vehicle. Change vehicle

NHTSA Vehicle Safety Recalls

  • Recall Number
    07E088000
    Recall Date
    10/24/2007
    Component
    EQUIPMENT
    Summary

    CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

    Consequence

    THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.

    What Owners Should Do

    HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.

  • Recall Number
    06E043000
    Recall Date
    05/19/2006
    Component
    FUEL SYSTEM, GASOLINE
    Summary

    CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.

    Consequence

    THIS CONDITION MAY CAUSE AN INADEQUATE SEAL AT THE CONNECTION, POTENTIALLY LEADING TO A FUEL LEAK. IN THE PRESENCE OF AN IGNITION SOURCE, A FIRE COULD OCCUR.

    What Owners Should Do

    HONEYWELL WILL NOTIFY OWNERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT FRAM CUSTOMER SERVICE AT 1-800-890-2075 (OPTION 1).

  • Recall Number
    98V033000
    Recall Date
    02/17/1998
    Component
    SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR
    Summary

    VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS AND MULTI-PURPOSE PASSENGER VEHICLES. ONE OR BOTH FRONT BRAKE ROTOR/HUBS WERE BUILT WITH AN OUT-OF-SPECIFICATION GRAY IRON THAT CAN FAIL DURING THE LIFE OF THE VEHICLE.

    Consequence

    IF A DRIVER CONTINUES TO DRIVE WITH A CRACKED ROTOR, THE CRACKS COULD CONTINUE AROUND THE WHEEL MOUNTING BOLT CIRCLE AND ULTIMATELY RESULT IN A WHEEL SEPARATION.

    What Owners Should Do

    DEALERS WILL INSPECT THE ROTORS FOR A CORE DATE OF "287" AND, IF FOUND, REPLACE THE ROTOR.

  • Recall Number
    97V142000
    Recall Date
    08/29/1997
    Component
    STEERING:GEAR BOX (OTHER THAN RACK AND PINION)
    Summary

    VEHICLE DESCRIPTION: LIGHT DUTY EXTENDED-CAB PICKUP TRUCKS AND 4-DOOR UTILITY TRUCKS. THE LOWER STEERING SHAFT TO STEERING GEAR PINCH BOLT IS "FINGER LOOSE" OR MISSING ALLOWING THE BOLT TO LOOSEN AND FALL OUT. THE STEERING SHAFT YOKE CAN WEAR CAUSING AN OFF CENTER STEERING WHEEL.

    Consequence

    RELATIVE MOVEMENT BETWEEN THE CHASSIS AND CAB CAN CAUSE THE STEERING SHAFT TO SEPARATE FROM THE STEERING GEAR. THIS CONDITION CAN RESULT IN A LOSS OF STEERING CONTROL INCREASING THE RISK OF A VEHICLE CRASH.

    What Owners Should Do

    DEALERS ARE ARRANGING TO HAVE THE VEHICLES INVOLVED TOWED TO THE DEALERSHIP AND ALTERNATE TRANSPORTATION IS BEING ARRANGED FOR OWNERS. DEALERS WILL THEN INSPECT THE VEHICLE FOR THE PRESENCE OF A PINCH BOLT AND TORQUE THIS BOLT TO PROPER SPECIFICATIONS.

What Should You Do?

Contact your dealer as soon as possible
Every recall is serious, so it’s important that you contact an authorized service center as soon as possible to make an appointment to get it fixed.