1994 Saab 9000 Recalls

There are currently 4 recalls for your vehicle. Change vehicle

Search by VIN

Get the status of recalls on your car.

Search By:

Enter all letters and numbers

Enter a valid 5-digit ZIP code.

NHTSA Vehicle Safety Recalls

  • Recall Number
    95V067000
    Recall Date
    03/29/1995
    Component
    SERVICE BRAKES, HYDRAULIC:ANTILOCK:CONTROL UNIT/MODULE
    Summary

    MOISTURE CAN FOLLOW THE ELECTRICAL HARNESS AND ENTER THE PRESSURE SWITCH CONNECTOR CAUSING CORROSION AND MALFUNCTION OF THE SWITCH.

    Consequence

    THE CORROSION CAUSES A DETERIORATION OF THE ELECTRICALSWITCH CONNECTION AND CAN RESULT IN FALSE ILLUMINATION OF ABS AND/OR THE BRAKE WARNING LIGHTS AND/OR THE LOSS OF POWER ASSISTANCE BECAUSE OF NO HYDRAULIC PUMPOPERATION. LOSS OF POWER ASSIST INCREASES THE DRIVER'S BRAKE PEDAL EFFORT REQUIRED FOR STOPPING WHICH CAN RESULT IN EXTENDED BRAKING DISTANCES.

    What Owners Should Do

    DEALERS WILL INSPECT THE ELECTRICAL CONNECTIONS TO THE ABS PRESSURE SWITCH TERMINALS FOR CORROSION AND INSTALL A SHRINK HOSE TO THE WIRING HARNESS TO AVOID MOISTURE ENTERING THE CONNECTION. PRESSURE SWITCHES WITH CORRODED CONNECTORS WILL BE REPLACED.

  • Recall Number
    99V109000
    Recall Date
    05/06/1999
    Component
    AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE
    Summary

    VEHICLE DESCRIPTION: PASSENGER VEHICLES. MOISTURE CAN ENTER THE AIR BAG INFLATABLE RESTRAINT ELECTRONIC CONTROL MODULE (ECM) AND CAUSE CORROSION ON PORTIONS OF THE ECM PRINTER CIRCUIT BOARDS.

    Consequence

    THIS CORROSION CAN POSSIBLY CREATE OPEN CONNECTIONS IN CIRCUITS WHICH CONTROL THE RESTRAINT DEPLOYMENT, POSSIBLY CAUSING INADVERTENT AIR BAG DEPLOYMENT.

    What Owners Should Do

    DEALERS WILL INSPECT THE EXTERIOR OF THE ECM. IF THERE IS NO INDICATION OF MOISTURE, A COVER WILL BE INSTALLED OVER THE ECM. IF THERE IS INDICATION OF MOISTURE, THE DEALER WILL REPLACE THE ECM AND INSTALL A COVER OVER THE NEW ECM.

  • Recall Number
    94V084000
    Recall Date
    05/02/1994
    Component
    EXTERIOR LIGHTING:BRAKE LIGHTS
    Summary

    ONE OF THE BULBS IN EACH OF THE BRAKE LIGHT LOWER OUTBOARD LAMP ASSEMBLIES MAY NOT HAVE BEEN PROPERLY WIRED, RESULTING IN IMPROPER TAIL LIGHT ILLUMINATION ON BRAKE APPLICATION. THIS DOES NOT CONFORM TO THE REQUIREMENTS OF FMVSS NO 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

    Consequence

    CONSEQUENCE OF NON-COMPLIANCE: IMPROPER ILLUMINATION OF BRAKE LIGHTS DURING BRAKE APPLICATION MAY NOT SIGNAL FOLLOWING DRIVERS OF THE OPERATOR'S INTENT TO SLOW OR STOP AND COULD RESULT IN A VEHICLE COLLISION.

    What Owners Should Do

    DEALERS WILL MODIFY THE BRAKE LIGHT OUTBOARD LAMP ASSEMBLIES TO MEET FMVSS REQUIREMENTS.

  • Recall Number
    94V126000
    Recall Date
    07/08/1994
    Component
    ENGINE AND ENGINE COOLING:COOLING SYSTEM
    Summary

    DURING LOW ENERGY FRONTAL IMPACT COLLISIONS, THE FRONT CROSSMEMBER CAN CONTACT THE METAL TUBING PORTION OF THE COOLER HOSE ASSEMBLY; AND/OR THE HOSE ASSEMBLY CAN BREAK AND LEAK OIL ONTO THE HOT EXHAUST MANIFOLD OR THE TURBOCHARGER.

    Consequence

    OIL LEAKING ON THESE HOT ENGINE SURFACES CAN IGNITE AND CAUSE A VEHICULAR FIRE.

    What Owners Should Do

    DEALERS WILL INSTALL A PROTECTIVE COVER WHICH WILL PROTECT THE COOLER AND HOSES FROM OTHER STRUCTURAL COMPONENTS IN LOW ENERGY FRONT IMPACTS.

What Should You Do?

Contact your dealer as soon as possible
Every recall is serious, so it’s important that you contact an authorized service center as soon as possible to make an appointment to get it fixed.

Interested in learning more? Check out our Maintenance 101 tips or the terms glossary.

Need to make other repairs? Get repair estimates at service centers near you.

How Would You Review This Vehicle?

Consumer Review Rating

5.0

Average based on 1 reviews

Write a Review

Research the 1994 Saab 9000