Hyundai SANTA FE Recalls
Search for recalls by car
Make selection is required
NHTSA safety recall results (45)
Recall information provided by National Highway Traffic Safety Administration
Power train
2013-08-12
13V355000
Hyundai is recalling certain model year 2013 front wheel drive Santa Fe Sport vehicles manufactured July 13, 2012, through March 12, 2013; and equipped with 2.4 liter engines. Due to a manufacturing issue, the right front axle shaft may fracture.
A fractured front axle may result in a loss of power to the wheels. Additionally, if the vehicle is parked without the parking brake applied, it may roll away. Either condition increases the risk of a crash.
Hyundai will notify owners, and dealers will replace the front axle shaft assembly, free of charge. The recall is expected to begin in September 2013. Owners may contact Hyundai Custom Care Center at 1-800- 633-5151. Hyundai's recall number is 112.
View details Hide details
Service brakes, hydraulic, exterior lighting
2013-04-01
13V113000
Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the crui...
Failure to illuminate the stop lamps during braking or inability to disengage the cruise control could increase the risk of a crash. Additionally, when the ignition is in the 'ON' position, the transmission shifter may be able to be moved out of Park without first applying the brake. This may lead to unintentional movement of the car which may increase the risk of a crash.
Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai's recall campaign number is 110.
View details Hide details
Air bags: Frontal: Sensor/control module
2012-07-24
12V354000
Hyundai is recalling certain model year 2007 through 2009 Santa Fe vehicles manufactured from April 19, 2006, through July 7, 2008. The occupant classification system (OCS) may need recalibration to accurately detect small statured adults.
Improper classification or detection may cause the front passenger airbag not to deploy in the event of a crash, increasing the risk of injury to the front passenger.
Hyundai will notify owners, and dealers will update the classification software free of charge. The manufacturer has not yet provided the agency with a notification schedule. Owners may contact Hyundai at 1-800-633-5151.
View details Hide details
Equipment
2011-09-30
11E040000
CURT MANUFACTURING IS RECALLING CERTAIN TOW PACKAGE WIRING HARNESSES, PART NUMBER 55538, THAT CONNECT TOW VEHICLE LIGHTING CIRCUITS TO TRAILER LIGHTING CIRCUITS SOLD FOR USE ON CERTAIN MODEL YEAR 2009 THROUGH 2011 HYUNDAI SANTA FE VEHICLES. THE UNITS ARE NOT WATER-TIGHT AND MOISTURE CAN SEEP INTO THE CONVERTER MODULE AND DEFEAT THE MODULE'S INTERNAL CIRCUIT PROTECTION.
WITHOUT THE CIRCUIT PROTECTION, THE MODULE CAN OVERHEAT POSSIBLY RESULTING IN A FIRE.
CURT MANUFACTURING WILL NOTIFY OWNERS AND REPLACE THE TOW PACKAGE WIRING HARNESS. THE REMEDY WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING OCTOBER 2011. OWNERS MAY CONTACT CURT MANUFACTURING AT 1-715 831-8713.
View details Hide details
Air bags: Frontal
2011-09-08
11V472000
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2007-2008 HYUNDAI VERACRUZ VEHICLES MANUFACTURED FROM DECEMBER 26, 2006, THROUGH MARCH 21, 2008, AND MODEL YEAR 2007-2008 HYUNDAI SANTA FE VEHICLES MANUFACTURED FROM APRIL 19, 2006 THROUGH MARCH 20, 2008. THE CLOCK SPRING CONTACT ASSEMBLY FOR THE DRIVER'S AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) MAY BECOME DAMAGED THROUGH USAGE OVER TIME. THE DRIVER'S AIR BAG ELECTRICAL CIRCUIT WILL EXPERIENCE A HIGH RESISTANCE CONDITION, POTENTIALLY CAUSING THE DRIVER'S AIR BAG TO NOT DEPLOY.
IF THE CLOCK SPRING DEVELOPS HIGH RESISTANCE, IN THE EVENT OF A CRASH, THE DRIVERS AIR BAG WILL NOT DEPLOY AND WILL NOT BE ABLE TO PROPERLY PROTECT THE DRIVER, INCREASING THE RISK OF INJURIES.
HYUNDAI DEALERS WILL REPLACE THE VEHICLE'S DRIVER'S AIR BAG CLOCK SPRING CONTACT ASSEMBLY AS NECESSARY FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING SEPTEMBER 2011. OWNERS MAY CONTACT HYUNDAI CUSTOMER CONNECT CENTER AT 1-800-633-5151.
View details Hide details
Power train: Driveline: Driveshaft
2011-04-27
11V261000
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2010 SANTA FE 2WD VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS AND 2.4L ENGINES MANUFACTURED FROM OCTOBER 15, 2009 THROUGH MARCH 5, 2010. THE INTERMEDIATE SHAFT MAY SUFFER FROM NOISE AND EXCESSIVE WEAR DUE TO A MISALIGNMENT OF THE INTERMEDIATE SHAFT WITH THE RIGHT SIDE OUTPUT GEAR. CONTINUING TO DRIVE THE VEHICLE IN THIS CONDITION LEADS TO THE DEVELOPMENT OF A WHIRRING/WHINING NOISE AND CAN EVENTUALLY CAUSE DAMAGE TO THE AUTOMATIC TRANSMISSION.
DAMAGE TO THE TRANSMISSION MAY CAUSE LOSS OF MOTIVE POWER, INCREASING THE RISK OF A CRASH.
DEALERS WILL REPLACE THE RIGHT SIDE OUTPUT GEAR AND INTERMEDIATE SHAFT FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING JUNE 2011. OWNERS MAY CONTACT HYUNDAI'S CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
View details Hide details
Service brakes, hydraulic: Foundation components: Disc: Caliper
2010-12-29
10V613000
HYUNDAI IS RECALLING CERTAIN MODEL YEAR 2011 SANTA FE VEHICLES MANUFACTURED FROM SEPTEMBER 28, 2010, THROUGH NOVEMBER 25, 2010. SOME OF THE REAR BRAKE CALIPERS MAY NOT HAVE BEEN PROPERLY MACHINED.
AS A RESULT, BRAKE FLUID WILL LEAK, FOLLOWED BY ILLUMINATION OF THE MALFUNCTION INDICATOR LIGHT INDICATING THE BRAKE FLUID LEVEL IS LOW AND SHOULD BE CHECKED, THEN A SOFT OR SPONGY BRAKE PEDAL FEEL, AND IF NOT SERVICED, REDUCED BRAKING POWER WHICH COULD INCREASE THE RISK OF A CRASH.
DEALERS WILL INSPECT THE REAR CALIPERS AND REPLACE IT IF NECESSARY FREE OF CHARGE. THE MANUFACTURER HAS NOT YET PROVIDED AN OWNER NOTIFICATION SCHEDULE. OWNERS MAY CONTACT HYUNDAI ROADSIDE ASSISTANCE AT 1-800-243-7766.
View details Hide details
Service brakes, hydraulic: Switches: Brake light
2009-04-14
09V122000
HYUNDAI IS RECALLING 531,894 MY 2006-2007 ACCENT, ENTOURAGE, SONATA, MY 2007 AZERA, ELANTRA AND SANTA FE, MY 2005-2007 TUCSON AND MY 2007-2008 VERACRUZ VEHICLES. THE STOP LAMP SWITCH IN THE AFFECTED VEHICLES MAY MALFUNCTION. A MALFUNCTIONING STOP LAMP SWITCH MAY CAUSE THE BRAKE LIGHTS TO NOT ILLUMINATE WHEN THE BRAKE PEDAL IS DEPRESSED OR MAY CAUSE THE BRAKE LIGHTS TO REMAIN ILLUMINATED WHEN THE BRAKE PEDAL IS RELEASED. A STOP LAMP SWITCH MALFUNCTION MAY AFFECT THE OPERATION OF THE BRAKE-TRANSMISSION SHIFT INTERLOCK FEATURE SO THE TRANSMISSION SHIFTER WOULD NOT BE ABLE TO BE SHIFTED OUT OF PARK POSITION. IT MAY ALSO CAUSE THE ELECTRONIC STABILITY CONTROL (ESC) MALFUNCTION LIGHT TO ILLUMINATE, AND IT MAY NOT DEACTIVATE THE CRUISE CONTROL WHEN THE BRAKE PEDAL IS DEPRESSED.
THESE MALFUNCTIONS MY LEAD TO A CRASH.
DEALERS WILL REPLACE THE STOP LAMP SWITCH FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING APRIL 2009. OWNERS MAY CONTACT HYUNDAI CUSTOMER ASSISTANCE CENTER AT 1-800-633-5151.
View details Hide details
Trailer hitches
2008-07-22
08E055000
HYUNDAI IS RECALLING 3,387 TRAILER HITCH WIRING HARNESSES EITHER INCLUDED WITH A TRAILER HITCH OR SOLD AS A SERVICE PART MANUFACTURED BY THULE TOWING SYSTEMS AND DISTRIBUTED BY HYUNDAI FOR INSTALLATION ON MY 2007-2008 SANTA FE AND VERACRUZ VEHICLES. THE ACCESSORY TRAILER HITCH WIRING HARNESS CONVERTER MODULE IS MOUNTED TO THE TOP SURFACE OF THE REAR BUMPER REINFORCEMENT. SOME CIRCUIT BOARD COMPONENTS MAY NOT HAVE BEEN THOROUGHLY SEALED TO PREVENT MOISTURE CONTACT. THE MOISTURE MAY RESULT IN CIRCUIT BOARD CORROSION POSSIBLY CAUSING A SHORT CIRCUIT.
A SHORT CIRCUIT CAUSES OVERHEATING AND DAMAGE TO THE CONVERTER MODULE, POSSIBLY RESULTING IN A FIRE.
THIS RECALL SUPERSEDES A PREVIOUS RECALL CONDUCTED BY HYUNDAI AFFECTING THE SAME TRAILER HITCH WIRING COMPONENTS CONCERNING HIGH CURRENT LEAKAGE OR A SHORT CIRCUIT OF CAPACITOR C1. (PLEASE SEE 08E016). OWNERS WHO HAVE ALREADY HAD THEIR TRAILER HITCH REPAIRED UNDER THE INITIAL CAMPAIGN WILL RECEIVE A SECOND NOTICE FROM HYUNDAI TO HAVE THE NEWLY DESIGNED HARNESS INSTALLED. HYUNDAI WILL NOTIFY ALL OWNERS AND WILL REPAIR THE AFFECTED HARNESSES FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING SEPTEMBER 2008. OWNERS MAY CONTACT HYUNDAI CUSTOMER ASSISTANT CENTER AT 1-800-633-5151.
View details Hide details
Equipment: Other: Labels
2008-06-11
08V272000
HYUNDAI IS RECALLING 88,943 MY 2007-2008 HYUNDAI SANTA FE VEHICLES EQUIPPED WITH P235/60R18 TIRES. THESE VEHICLES FAIL TO COMPLY WITH THE LABELING REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110 "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES." THE BLACK CERTIFICATION LABEL AFFIXED TO THE DRIVER'S SIDE CENTER PILLAR, INCORRECTLY LISTS THE GROSS AXLE WEIGHT RATINGS (GAWR).
OVERLOADING YOUR VEHICLE MAY ADVERSELY AFFECT HANDLING AND BRAKING AND MAY CAUSE TIRE DAMAGE, RESULTING IN TIRE FAILURE AND A CRASH WITHOUT WARNING.
HYUNDAI WILL MAIL CORRECTED CERTIFICATION LABELS ALONG WITH THE INSTRUCTIONS TO THE AFFECTED OWNERS. THE CUSTOMER WILL HAVE THE OPTION FOR DEALERS TO INSTALL THE LABEL FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING AUGUST 2008. OWNERS MAY CONTACT HYUNDAI AT 1-800-633-5151.