Ford F-350 Recalls

Ford Motor Company (Ford) is recalling certain model year 2016 Ford F-250, F-350, F-450, and F-550 trucks manufactured April 5, 2016, to April 11, 2016. The tires installed during assembly of the affected vehicles may have sustained damage to the inner sidewall, possibly resulting in a loss of air or a tire rupture.

Ford Motor Company (Ford) is recalling certain model year 2011-2015 Ford F-350, F-450, and F-550 trucks manufactured February 22, 2010, to January 30, 2015, and equipped with ambulance or fire engine preparation packages. The affected vehicles may detect an incorrect Exhaust Gas Temperature Sensor (EGT) fault indicating that the vehicle is too hot, causing the engine management system to shut down the engine and prevent its immediate restart.

Jerr-Dan Corporation (Jerr-Dan) is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Superduty chassis modified by Jerr-Dan and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Iowa Mold Tooling Co., Inc. will notify owners and dealers to inspect the Muncie PTO pressure switch to determine if it is from the range of defective switches and if required, remove the pressure switch assembly and put a plug in the port where the PTO switch had been installed. This switch was never being utilized. This will be done free of charge. The recall is expected to begin in mid-July 2014. Owners may contact Iowa Mold Tooling Co., Inc. at 1-800-247-5958.

Stahl is recalling certain model year 2009-2014 Ford F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty vehicles modified by Stahl and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Tactical Vehicle Outfitters (Tactical) is recalling certain model year 2010-2014 Ford F-350 and F-550 vehicles modified by Tactical and equipped with certain Muncie Power Products PTO Assemblies. In the affected vehicles, oil may leak from the PTO pressure switch onto a thermal blanket covering the exhaust.

Ford Motor Company (Ford) is recalling certain model year 2015 F-250, F-350, F-450, and F-550 Super Duty trucks manufactured September 13, 2013, through March 28, 2014, and equipped with 6.2L gasoline or 6.7L diesel engines and 6R140 transmissions. An error with the transmission control software may be such that while shifting from "Park" to "Drive" the vehicle may display "Drive" but possibly engage "Reverse" for 1.5 seconds before engaging "Drive." Therefore, the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 102, "Transmission Shift Lever Sequence, Starter Interlock, and Transmission Braking Effect."

Ford Motor Company (Ford) is recalling certain model year 2011-2012 F-350/450/550 Ambulance Package vehicles manufactured February 22, 2010, through October 19, 2012 and equipped with a 6.7L diesel engine. Due to an exhaust sensor problem, the vehicles may experience loss of power followed by an engine stall.

FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-150 VEHICLES MANUFACTURED FROM SEPTEMBER 9, 2011, THROUGH SEPTEMBER 22, 2011, AND MODEL YEAR 2012 F-250, F-350, F-450 AND F-550 HEAVY DUTY VEHICLES MANUFACTURED FROM SEPTEMBER 12, 2011, THROUGH SEPTEMBER 22, 2011. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NUMBER 114, "THEFT PROTECTION." THE TRANSMISSION CAN BE SHIFTED OUT OF THE PARK POSITION WITHOUT PRESSING THE BRAKE PEDAL DUE TO BRAKE SHIFT INTERLOCK SWITCH PROBLEM.

CONTINENTAL TIRE IS RECALLING CERTAIN CONTITRAC TR TIRES, SIZE LT275/70R18 125/122S OUTLINE WHITE LETTERS AND BLACK SIDEWALL, AND CONTITRAC, SIZE LT275/70R18 125/122S, BLACK SIDEWALL, PRODUCED FROM MAY 6, 2007, THROUGH SEPTEMBER 20, 2008, SOLD AS AFTERMARKET AND INSTALLED AS ORIGINAL EQUIPMENT ON SOME MODEL YEAR 2008 AND 2009 FORD F-250 AND F-350 TRUCKS. SOME OF THESE TIRES MAY EXPERIENCE UNEVEN WEAR, VIBRATION, OR PARTICULARLY UNDER CONDITIONS OF OVERLOADING OR UNDER INFLATION IN HIGH AMBIENT TEMPERATURE USAGE, SEPARATION BETWEEN THE BELT EDGES.