How Do Car Seats Fit in a 2025 Toyota Camry?
The verdict: Toyota redesigned its mid-size Camry sedan for 2025, and it comes only as a hybrid for the new model year. Inside, the cabin gets a fresh design with new materials; rear legroom is unchanged from the previous generation. The 2025 Camry’s easy-access lower anchors eased car seat installation, but taller front passengers will want a little more legroom when a rear-facing car seat is installed behind them.
Does it fit three car seats? No.
Take a look at how the Latch system and each car seat scored below in our Car Seat Check of the 2025 Toyota Camry.
Related: Search Car Seat Checks
Latch: Grade A
The two sets of lower anchors sit under removable plastic covers and are easy to use. Three top tether anchors sit on the rear shelf under flip-up covers; they’re also easy to find and use.
Infant Seat: Grade B
This seat was easy to install thanks to the sedan’s accessible lower anchors. We had to move the front passenger seat forward, however. Our 5-foot-7-inch front passenger had OK legroom; taller passengers will need more to be comfortable.
Rear-Facing Convertible: Grade B
Again, the seat installed easily, but taller passengers will likely need more space in front of the seat to be comfortable.
Forward-Facing Convertible: Grade A
We had no trouble accessing the lower anchors or top tether anchor to install this seat. The sedan’s head restraint is removable, so the convertible can be situated flush against the seatback.
Booster Seat: Grade B
The booster fits well in the Camry’s bolstered rear seat, and the head restraint can be removed to situate the booster flush against the seatback. The sedan’s belt buckles sit low in the seat cushion, however, which could make them tough for kids to grasp and use independently.
About Cars.com’s Car Seat Checks
Editors Jennifer Geiger and Jennifer Newman are certified child safety seat installation technicians.
For the Car Seat Check, we use a Chicco KeyFit 30 infant-safety seat, a Graco Contender 65 convertible seat and Graco TurboBooster seat. The front seats are adjusted for a 6-foot driver and a shorter passenger. The three child seats are installed in the second row. The booster seat sits behind the driver’s seat, and the infant and convertible seats are installed behind the front passenger seat.
We also install the forward-facing convertible in the second row’s middle seat with the booster and infant seat in the outboard seats to see if three car seats will fit; a child sitting in the booster seat must be able to reach the seat belt buckle. If there’s a third row, we install the booster seat and a forward-facing convertible. Learn more about how we conduct our Car Seat Checks.
Parents should also remember that they can use the Latch system or a seat belt to install a car seat, and that Latch anchors have a weight limit of 65 pounds, including the weight of the child and the weight of the seat itself.
Cars.com’s Editorial department is your source for automotive news and reviews. In line with Cars.com’s long-standing ethics policy, editors and reviewers don’t accept gifts or free trips from automakers. The Editorial department is independent of Cars.com’s advertising, sales and sponsored content departments.
