Used Toyota Tundra trucks for sale near Francestown, NH under $899,990

Customers have to take responsibility for their choices. Maybe I got lucky but I got a beautiful truck, and was treated like the good human that I am. Chris went above and beyond. Thanks

Awesome truck , I'll never buy another brand again. The mpg is what it is.... Love the look and the power it has to move when you need it..

Eric and everyone were awesome to deal with. I had a price range i wanted and they worked with me. Long story short I got a better monthly rate then i expected. Totaly pumped about my new truck. As far as buying a new used vehicle I was very pleased with the experience and process, I would highly recommend them to my friends & family.

only had the truck for a little while now but the power if the 5.7 is instant. I came from a midsize truck and I don't think ill ever look back. From Ford to Toyota I'll never buy something that isn't Toyota.

I like to thank Tim Jr and the service department for helping me with tires for my truck. As always was greeted with great customer service and the service tech did a great job . Thanks again Tim and team great experience every time.

I’ve had no issues with the truck. The interior is nice. Good sound system and comfortable seats. The gas mileage isn’t too bad in my experience. I’m at and average of 17mpg and I drive it in an area with heavy traffic.

My experience with Price auto was excellent. Eric was our salesman and Dave was wonderful at taking care of all the business Transactions. I would definitely recommend this place if you are looking for a good used car. They went above and beyond to help my son Timothy and I purchase a truck for him. I would recommend this dealership to anyone to buy a vehicle. Very courteous very helpful. I thank them both very much Ms Levesque

I was a long time Chevy truck guy but decided to get a new 2021 Tundra primarily due to the bulletin proof drivetrain reputation. Got it right as the COVID thing was getting rolling, just dumb luck. The good and bad of the drivetrain is that it is a 13 year old design but with constant improvements. The gas mileage isn’t great but are you buying a full sized truck because you’re trying to save on gas? The power has impressed me since day one and the handling is great. The durability is beyond belief. Without going into a ton of detail, after a long day of hunting I was tired and probably should have let my son drive. I misjudged an automated tollbooth entrance and caught the safety curb going a little too fast. Both right side tires got destroyed from impact with the curb and I thought that I was going to have significant suspension damage. I replaced the 2 tires and it was like nothing ever happened! That was a few thousand miles ago and not even the hint of a problem, alignment is perfect and straight. Best truck I’ve ever owned!

Matt at Tim's truck capital was awesome to work with. He answered all my questions and was willing to work with me being an out of state purchase. I found a truck in state instead, but I'd definitely work with Matt again if I need another work truck. Great business with a great selection of trucks

Runs well nice ride i have the 1794 edition and it is the best truck i have owned. my favorite is driving it on road and off it handles well and i feel secure.

Best dealership in the area. Everything about the transaction was as they agreed. They delivered the vehicle, signed a few docs and I was on my way.

The Tundra has been a great truck. I currently have 162K miles, and it runs great. I maintain the vehicle exactly as per factory recommendations, and Toyota of Lancaster (CA) does all my maintenance. The only problem is the cheap two-piece OEM lug nuts that Toyota builds the truck with. The lug nuts appear to be nice, big, shiny, solid, heavy-duty lug nuts; however, they are actually comprised of a small, unattractive core (the actual lug nut) to which Toyota adds a nice big shiny-bright 'chrome' cheap sheet metal cover (the fake "heavy-duty" lug nut). At approx. 150K miles, the cheap sheet metal cover - having been beaten up by the Toyota Service Dept torque wrenches every 5K when I have the tire/wheels rotated - are battered at the corners and won't accept a standard socket. The Toyota of Lancaster (CA) Service Dept then told me that they could not rotate my wheels/tires because the "lug nuts are swollen" and they cannot remove/replace the lug nuts. When - in disbelief - I stated that I doubted that was the case and asked what could possibly cause lug nuts to "swell", the service rep told me (with a straight face) that sun, water, dirt, mileage, etc., all contribute to lug nut "swelling." I then stated that if my lug nuts are damaged, then Toyota's Service Dept and their careless use of impact wrenches are to blame as they are the only ones removing/replacing the wheels/tires. When I asked how much to replace the "swollen lug nuts", I was quoted "$492.50". I refused to pay that ridiculous sum and left the dealership. I then checked online and found that the OEM lug nuts that Toyota (along with Ford and Chevy) build their trucks with are the cheap, two-piece lug nuts that easily get beaten up by impact wrenches "battering" the corners. I found that I could purchase a new 'OEM' after-market set of the two-piece lug nuts online for around $31, but I decided to purchase a quality set of solid lug nuts for $105, along with a set of 'flip sockets' to use to wrench-off (using a breaker bar, and not an impact wrench) damaged nuts without rounding-off the corners. I removed (and retained, hopefully as evidence for a class action suit against Toyota and Toyota dealers) the battered OEM lug nuts and replaced them with the new solid, one-piece lug nuts and hand-torqued them to 97 ft-lbs. Think about it - Toyota sells millions of trucks and if they all end up with "swollen" lug nuts at around 150K miles (assuming wheel/tire rotations at 5K intervals), then Toyota and the Toyota dealers end up making millions of dollars by replacing a set of twenty cheap, two-piece lug nuts with another set of twenty cheap, two-piece lug nuts, at $492.50 a pop!!! So while my Tundra has otherwise been (and remains) a great truck, Toyota's use of cheap, two-piece junk OEM lug nuts combined with Toyota dealerships charging $492.50 to R&R the OEM set with another cheap OEM set, has left me pissed off at Toyota and Toyota of Lancaster (CA).

Have been shopping for a truck for a week. Though I did not ultimately purchase a vehicle at Neat, my experience with Louis made this dealership my top pick among the 7 or 8 that I visited. I had narrowed my purchase down to two very different options - a higher mileage 4 cylinder at Neat and a lower miles 6 cylinder in a higher price point at another dealership. Louis sat down with me to look at both options, and encouraged me that the other vehicle appeared to be a great deal. He talked through the potential trade-offs without any pressure, and even after it became clear that I was leaning toward the V6 he continued to spend time to help me understand the complications with the Tacoma frame recall which affected both purchases. He also gave me a number of references for folks who could help out with my purchase of the other vehicle, for modifications I was interested in making. Louis is knowledgable, generous and clearly puts his customer first. Neat will be my first stop for my next purchase.

I’m the original owner. I bought this Tundra in Midland, TX in August 2012. Have had nothing but praise for the service I have received, not only from the dealer, but from Toyota financial services. Since I was a two time owner with Tacomas V6, I specifically asked for a Tundra V8. I wanted the power to pull heavy loads, knowing the Tundra is the one. It has over 156,000 miles and it still runs like a new truck.

I want to thank Alexander for his help . He was very polite and took his time to answer my questions. And at checkout he made sure everything was ready to go.

The truck is designed with the best quality and engineering I've ever experienced with any other truck brand. Beautiful design inside and out. It drives like a charm. The wheels steer like a sedan. I won't buy any other car other than a Tundra in the future.

I drove from PENACOOK concord line down to Ira Toyota in Manchester nh. Upon arriving I was greeted by a friendly gentleman, he asked me if I preferred to work with a specific advisor. I replied yes Mike Rivera. After waiting for what seemed like a couple seconds Mr,!rivera approached me and greeted me with a smile and a good morning. He conducted his routine and let me know it will be an hour and half until My car was finished. I told him thank you and let him know I?m in no rush. He said I can wait up in the showroom so off I went very appreciatively. After getting weather update form my wife a snow storm would start in around an hour I let Mr. Rivera know. He then texted me and said he?ll do his best to have me home before storm. Approximately after waiting 15!minutes Mr. Rivera approached me and said he?ll have me on the road in 15!minutes. He held true to his word. I was all set. I paid my bill and headed home. But before leaving I told all desk associates to have a nice Christmas and they all replied you as well. The customer service I received was next level. The best experience I?ve ever had at Ira or any other dealership! The management at Ira in Manchester nh should be proud and elated that the associates are well prepared knowledgeable and best of all people friendly I plan to upgrade my Corolla next year and absolutely plan to do it with Ira where I bought my Corolla. Thanks Ira I appreciate everyone of you.

Nice smooth ride and plenty of power. Very good value. Roomy interior and durable mechanics. Excellent sound system and very low maintenance. Affordable work horse.

Sales staff were very helpful and polite. Their follow up calls and honesty should be a trend setter for other dealers to follow!

I love my Tundra which I have owned for 12 years and over 100,000 miles (now at 155,000 +). I just spent $2650 to get the frame repaired from corrosion. The area just forward of the leaf spring mounting has a plate mounted on the inside with rivets holding it to the main portion of the frame. This creates a space where water can remain and cause corrosion. My truck is babied and garage kept and still suffered this issue. I am an engineer and consider this issue a design problem. Toyoto should be ashamed of themselves. When I contacted them they refused to help because 10 years ago they recalled the truck, inspected it and recoated the problem areas. They should have advised owners to check, clean up and recoat this area yearly.