BMW 735 Recalls

There are currently 4 recalls for your vehicle. Change vehicle

NHTSA Vehicle Safety Recalls

  • Recall Number
    98V178000
    Recall Date
    08/04/1998
    Component
    ENGINE AND ENGINE COOLING:COOLING SYSTEM
    Summary

    VEHICLE DESCRIPTION: PASSENGER VEHICLES. A MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT, SUCH AS A THERMOSTAT, WATER PUMP, OR FAN BELT, CAN RESULT IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND SYSTEM PRESSURE. IF THE INDICATIONS OF A CRITICAL OVERHEATING CONDITION IS NOT NOTICED BY THE DRIVER, IT IS POSSIBLE THAT DAMAGE TO, OR FAILURE OF, A COOLANT SYSTEM COMPONENT COULD OCCUR.

    Consequence

    IF A CRACK WERE TO FORM OR A SEAM WERE TO SEPARATE IN THE HEATER CORE END PIECE, HOT COOLANT COULD SUDDENLY BE EXPELLED, INCREASING THE RISK OF PERSONAL INJURY TO A VEHICLE OCCUPANT.

    What Owners Should Do

    DEALERS WILL INSTALL A NEW DESIGN RADIATOR CAP TO CONTROL PRESSURE AND PROVIDE GREATER COOLANT OVERFLOW IN THE EVENT OF OVERHEATING.

  • Recall Number
    96V110000
    Recall Date
    07/01/1996
    Component
    AIR BAGS:FRONTAL
    Summary

    THE AIR BAG CONTACT RING LOCKING TAB LOCATED IN THE STEERING WHEEL ASSEMBLY CAN BREAK WITHOUT WARNING.

    Consequence

    IF THIS HAPPENS, THE CONTACT RING WIRING COULD EVENTUALLY BREAK. THE AIR BAG READINESS INDICATOR LAMP (SRS OR AIRBAG) IN THE INSTRUMENT CLUSTER WILL ILLUMINATE, AND THE AIR BAG WOULD NOT DEPLOY IN THE EVENT OF A FRONTAL IMPACT VEHICLE COLLISION.

    What Owners Should Do

    DEALERS WILL REPLACE THE LOCKING TAB WITH ONE OF A DIFFERENT DESIGN.

  • Recall Number
    96V111000
    Recall Date
    07/01/1996
    Component
    SERVICE BRAKES, HYDRAULIC:SWITCHES:BRAKE LIGHT
    Summary

    THE BRAKE LIGHT SWITCH CAN FAIL ALLOWING THE SWITCH TO REMAIN IN THE "BRAKE LIGHTS OFF" POSITION OR IN THE "BRAKE LIGHTS ON" POSITION.

    Consequence

    IF THIS HAPPENS, THE BRAKE LIGHTS EITHER WILL NOT OPERATE OR WILL BE CONTINUOUSLY ON, REGARDLESS OF BRAKE PEDAL POSITION. FOLLOWING DRIVERS WOULD NOT BE ABLE TO DETERMINE WHETHER THE VEHICLE IS STOPPING, INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.

    What Owners Should Do

    DEALERS WILL REPLACE THE EXISTING BRAKE LIGHT SWITCH WITH A NEWLY DESIGNED SWITCH.

  • Recall Number
    94V066000
    Recall Date
    04/11/1994
    Component
    FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
    Summary

    FEED FUEL HOSES CAN HARDEN AND "SET" OVER TIME, ALLOWING A SEEPAGE OF FUEL AT THE CONNECTION BETWEEN THE HOSE AND THE ENGINE FITTING. THE CLAMP USED TO HOLD THE HOSE TO THE FITTING IS UNABLE TO COMPENSATE FOR THE HARDENING OF THE FEED FUEL HOSE.

    Consequence

    FUEL SEEPAGE BETWEEN THE FEED FUEL HOSE AND THE ENGINE FITTING CAN RESULT IN FREE FUEL IN THE ENGINE COMPARTMENT, WHICH COULD RESULT IN A FIRE WHEN EXPOSED TO A SOURCE OF IGNITION.

    What Owners Should Do

    A REDESIGNED FEED FUEL HOSE AND HOSE CLAMP WILL BE INSTALLED TO ALLEVIATE THE FUEL SEEPAGE.

What Should You Do?

Contact your dealer as soon as possible
Every recall is serious, so it’s important that you contact an authorized service center as soon as possible to make an appointment to get it fixed.

Find Recalls for:

Interested in learning more? Check out our Maintenance 101 tips or the terms glossary.
Research the BMW 735