Dodge Intrepid Recalls
Search for recalls by car
Make selection is required
NHTSA safety recall results (7)
Recall information provided by National Highway Traffic Safety Administration
Component not known
00V180
On non-ABS equipped passenger vehicles, the brake master cylinder piston retainer snap ring may have been bent inward during the assembly process. The master cylinder piston may be in a "brake applied" position due to the damaged piston retainer snap ring. When the piston is in the applied position, the fluid compensation ports are closed which results in a brake drag condition. If the brake overheats, brake fading could lead to an increase in needed stopping distance. Should a driver not anticipate the extra stopping distance, this condition could cause a crash.
Dealers will replace the brake master cylinder. The manufacturer has reported that owner notification began July 24, 2000. Owners who do not receive the free remedy within a reasonable time should contact DaimlerChrysler at 1-800-992-1997.
View details Hide details
Component not known
00V034
The seat belt shoulder height adjustable turning loop (ATL) top mounting bolt was inadequately manufactured. The affected mounting bolts may not withstand sufficient force to function properly in certain impact situations, increasing the risk of injury to a belted occupant.
Dealers will replace the upper ATL bolt. Owner notification began March 13, 2000. Owners who do not receive the free remedy within a reasonable time should contact Chrysler at 1-800-992-1997.
View details Hide details
Component not known
99V343
The passenger air bag inflator assembly contains an incorrect inflator charge amount. This condition could increase the risk of a passenger occupant injury under certain crash conditions.
Dealers will replace the passenger air bag module with a correct module. Owner notification began Jan. 24, 2000. Owners who do not receive the free remedy within a reasonable time should contact Chrysler at 1-800-992-1997.
View details Hide details
Component not known
00V033
A manufacturing molding error can prevent the operation of the G-lock and tilt lock functions on some of the driver's side seat belt retractors. If this occurs in a frontal crash situation, driver protection from the seat belt may be reduced, increasing the risk of injury.
Dealers will replace the left front seat belt retractor assemblies. The manufacturer has reported that owner notification was to begin during March 2000. Owners who do not receive the free remedy within a reasonable time should contact Chrysler at 1-800-992-1997.
View details Hide details
Component not known
00V366
Certain passenger vehicles, pickup trucks and sport utility vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 225, "Child Restraint Anchorage Systems." Some of the owner's manuals for these vehicles are missing instructions that provide a step-by-step procedure, including diagrams, for properly attaching a child restraint system's tether strap to the tether anchorage. In the event of a crash, the child seat may not be properly attached, increasing the risk of injury to the child.
Owners will be provided with an addendum to the owner's manuals. The manufacturer has reported that owner notification began Nov. 12, 2000. Owners who do not receive the free owner's manual addendum within a reasonable time should contact Daimler Chrysler at 1-800-853-1403.
View details Hide details
Component not known
01V273
Certain passenger vehicles (non-sunroof only) fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 201, "Occupant Protection in Interior Impact." In the event of a crash, there is a potential for injury if the occupant's head were to contact the B-pillar.
Owners will be sent a storage bin accessory unit that can be attached to the B-pillar along with installation instructions. However, owners also can have a dealer perform the installation. DaimlerChrysler has not yet provided NHTSA with an owner notification schedule for this campaign. Owners who do not receive the free remedy within a reasonable time should contact DaimlerChrysler at 1-800-853-1403.
View details Hide details
Seat belts
2000-02-04
00V034000
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT SHOULDER HEIGHT ADJUSTABLE TURNING LOOP (ATL) TOP MOUNTING BOLT WAS INADEQUATELY MANUFACTURED.
THE AFFECTED MOUNTING BOLTS MAY NOT WITHSTAND SUFFICIENT FORCE TO FUNCTION PROPERLY IN CERTAIN IMPACT SITUATIONS, INCREASING THE RISK OF INJURY TO A BELTED OCCUPANT.
DEALERS WILL REPLACE THE SHOULDER BELT HEIGHT ADJUSTER MOUNTING BOLTS.