INFINITI Q50 Recalls

Make selection is required

NHTSA safety recall results (14)

Recall information provided by National Highway Traffic Safety Administration

Power train: Driveline: Driveshaft

Nissan North America, Inc. (INFINITI) is recalling certain 2011-2013 M56, 2012-2013 M35 Hybrid, 2014-2018 Q50, Q70 Hybrid, 2014-2019 Q70, and 2015-2019 Q70L two-wheel drive vehicles. The driveshaft can fatigue and break.

Recall consequence: A broken driveshaft can result in a loss of drive power, or a vehicle roll away when the vehicle is in park without the parking brake applied. Both scenarios can increase the risk of a crash.
Recall action: Dealers will replace the driveshaft, free of charge. Owner notification letters were mailed August 13, 2024. Owners may contact INFINITI's customer service at 1-800-662-6200. INFINITI's numbers for this recall are R24A5 and R24A7.

Back over prevention: Display function

Nissan North America, Inc. (Nissan) is recalling certain 2021 Infinity Q50, Q60, and QX80 vehicles. A software error may deactivate the audio/video control unit screen, preventing the rear-view image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Recall consequence: A rear-view camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.
Recall action: Dealers will update the control unit software, free of charge. Owner notification letters were mailed September 14, 2021. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is R21A9.

Steering: Linkages: Knuckle: Spindle: Arm

Nissan North America, Inc. (Nissan) is recalling certain 2020 Nissan Murano, INFINITI QX60, 2021 Nissan GT-R, INFINITI QX50, and Q50 vehicles. The front steering knuckle or rear axle housing may have insufficient strength due to improper heat-treatment.

Recall consequence: The steering knuckle or rear axle could deform upon impact, such as from hitting a curb, resulting in a loss of steering control, or possible wheel separation. Both of these conditions can increase the risk of a crash.
Recall action: Dealers will inspect and replace the front steering knuckle and rear axle housing, as necessary, free of charge. Owner notification letters were mailed July 26, 2021. Nissan owners may contact customer service at 1-800-867-7669. INFINITI owners may contact customer service at 1-800-662-6200.

Engine and engine cooling: Engine: Engine control module (ecu/ecm): Software

Nissan North America, Inc. (INFINITI) is recalling certain 2021 INFINITI Q50 and Q60 vehicles. After detecting rapid acceleration, the Engine Control Module (ECM) may incorrectly reduce engine power and reduce fuel supply to the engine.

Recall consequence: A lack of fuel may cause an engine stall, increasing the risk of a crash.
Recall action: INFINITI will notify owners, and dealers will reprogram the ECM software, free of charge. The recall began on May 25, 2021. Owners may contact INFINITI customer service at 1-800-662-6200. INFINITI's number for this recall is R20C5.

Back over prevention: sensing system: camera

Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Recall consequence: The lack of an image in the back-up camera display increases the risk of a crash.
Recall action: Nissan will notify owners in phases, having dealers update the back-up camera settings software, free of charge. The recall began November 11, 2019 and all affected VINs should be activated. Owners may contact Nissan customer service at 1-800-867-7669 or INFINITI customer service at 1-800-662-6200.

Air bags: Frontal: Driver side: Inflator module

Nissan North America (Nissan) is recalling certain 2017 Infiniti Q50 and Q50 Hybrid vehicles. The driver's frontal air bag inflator may have been improperly welded.

Recall consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator may crack and release the gas needed to properly deploy the air bag, increasing the risk of injury.
Recall action: Nissan will notify owners, and dealers will replace the driver side air bag inflator, free of charge. The recall began October 30, 2017. Owners may contact Infiniti customer service at 1-800-662-6200, option 7.

Fuel system, gasoline: Delivery: Fuel pump

Nissan North America, Inc. (Nissan) is recalling certain 2016-2018 Infiniti Q50 and 2017 Infiniti Q60 vehicles equipped with a 2.0L engine. Incorrect Fuel Pump Control Module (FPCM) software may allow the fuel level in the main tank to be too low to supply fuel to the engine, causing the engine to stall while driving.

Recall consequence: An engine stall can increase the risk of a crash.
Recall action: Nissan will notify owners, and Infiniti dealers will reprogram the Fuel Pump Control Module (FPCM) with corrected software, free of charge. The recall began August 29, 2017. Owners may contact Infiniti customer service at 1-800-662-6200.

Steering: Electric power assist system

Nissan North America, Inc.'s (Nissan) is recalling certain model year 2014-2016 INFINITI Q50 vehicles manufactured December 26, 2012, to December 11, 2015, and INFINITI Q50 Hybrid vehicles manufactured December 10, 2012, to December 17, 2015. The Direct Adaptive Steering system may experience an error at vehicle start up altering the vehicle's steering responsiveness and turning radius.

Recall consequence: If the vehicle does not steer as the driver anticipates, there is an increased the risk of a crash.
Recall action: Nissan will notify owners, and dealers will reprogram the Direct Adaptive Steering ECU software, free of charge. The recall began on August 12, 2016. Owners may contact Nissan customer service at 1-800-647-7261.

Air bags: Sensor: Occupant classification

Nissan North America, Inc. (Nissan) is recalling certain model year 2016-2017 Nissan Maxima, 2013-2016 Nissan Altima, NV200, LEAF, Sentra, and Pathfinder, 2014-2016 Nissan NV200 Taxi, Infiniti QX60, QX60 Hybrid, and Q50 Hybrid, 2014-2017 Nissan Rogue and Infiniti Q50, 2015-2016 Nissan Murano, Murano Hybrid, and Chevrolet City Express, 2014-2015 Nissan Pathfinder Hybrid, and 2013 Infiniti JX35 vehicles. In these vehicles, the front seat passenger Occupant Classification System (OCS) may incorrectly classify an adult passenger as a child or classify the seat as empty despite it being occupied. As a result, the passenger frontal air bag may be turned off and not deploy in the event of a crash.

Recall consequence: If the passenger frontal air bag does not deploy as intended in the event of a crash, the passenger is at an increased risk of injury.
Recall action: Nissan will notify their owners. Chevrolet City Express owners will be notified by General Motors. Dealers will reprogram the Air Bag Control Unit (ACU) and OCS Electronic Control Unit (ECU) in Altima, Maxima, Murano, Rogue, and Sentra vehicles, and replace the OCS ECU in LEAF, NV200, NV200 Taxi, Pathfinder, Infiniti Q50, JX35, and QX60 and Chevrolet City Express vehicles, free of charge. Interim notices were sent to owners on May 31, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Nissan customer service at 1-800-867-7669, Infiniti customer service at 1-888-833-3216 or Chevrolet customer service at 1-800-222-1020.

Engine and engine cooling: Engine

Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 INFINITI M35 hybrid vehicles manufactured April 7, 2012, to September 9, 2013, 2014 INFINITI Q50 hybrid vehicles manufactured December 10, 2012, to July 15, 2014, and 2014-2015 INFINITI Q70 hybrid vehicles manufactured April 9, 2010, to May 7, 2014. Due to a software error, In the affected vehicles, if the signal is lost from one of the two throttle position sensors (TPS), the engine control module (ECM) will go into a fail-safe mode, partially closing the throttle chamber. Should the lost signal be restored, the throttle chamber may open, regardless of the position signal from the TPS.

Recall consequence: The vehicle may gradually accelerate due to the throttle chamber reopening. This unexpected acceleration may increase the risk of a crash.
Recall action: Nissan will notify owners, and dealers will reprogram the ECM, free of charge. The recall began on November 10, 2014. Owners may contact Nissan customer service at 1-800-647-7261.