2006 Jeep Commander Recalls
NHTSA safety recall results (4)
Component not known
- Recall date
- 2014-07-21
- Recall no.
- 14V438000
This defect can affect the safe operation of the airbag system. Until this recall is performed, drivers should adjust their seat to allow clearance between the driver's knee and the ignition key, and remove all items from their key ring, leaving only the vehicle key. Chrysler Group LLC (Chrysler) is recalling certain model year 2005-2007 Jeep Grand Cherokee vehicles manufactured February 11, 2004, to July 5, 2007, and 2006-2007 Jeep Commander vehicles manufactured January 31, 2005, to July 5, 2007. In the affected vehicles, the driver may accidentally hit the ignition key with their knee, unintentionally knocking the key out of the run position, turning off the engine.
- Recall consequence
- If the ignition key inadvertently moves into the OFF or ACCESSORY position, the engine will turn off, which will then depower various key safety systems including but not limited to air bags, power steering, and power braking. Loss of functionality of these systems may increase the risk of crash and/or increase the risk of injury in the event of a crash.
- Recall action
- Chrysler will notify owners in September 2014. The remedy for this recall is still under development. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P41.
Electrical system, power train
- Recall date
- 2013-05-07
- Recall no.
- 13V175000
Chrysler Group LLC (Chrysler) is recalling certain model year 2005-2010 Jeep Grand Cherokee vehicles manufactured February 11, 2004, through March 9, 2010; and 2006-2010 Jeep Commander vehicles manufactured January 31, 2005, through March 10, 2010. A transfer case electrical failure may result in an unintentional shifting of the transfer case into the neutral position.
- Recall consequence
- If the vehicle shifts into neutral, it may roll away increasing the risk of a crash or personal injury.
- Recall action
- Chrysler will notify owners, and dealers will reflash the final drive controller which governs the transfer case, with new software, free of charge. The recall is expected to begin in June 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N23.
Power train: Automatic transmission: Control module (tcm, pcm)
- Recall date
- 2008-05-05
- Recall no.
- 08V203000
CHRYSLER IS RECALLING 24,461 MY 2006 JEEP COMMANDER VEHICLES EQUIPPED WITH 4.7L V8 ENGINES. THE POWERTRAIN CONTROL MODULE (PCM) WAS PROGRAMMED WITH SOFTWARE THAT MAY ALLOW THE ENGINE TO STALL UNDER CERTAIN OPERATING CONDITIONS.
- Recall consequence
- THIS COULD CAUSE A CRASH WITHOUT WARNING.
- Recall action
- DEALERS WILL REPROGRAM THE PCM SOFTWARE IN ALL 4.7L ENGINE EQUIPPED MY 2006 JEEP COMMANDERS BUILT PRIOR TO JANUARY 11, 2006. THE RECALL IS EXPECTED TO BEGIN DURING MAY 2008. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Service brakes, hydraulic: Antilock: Control unit/module
- Recall date
- 2007-09-11
- Recall no.
- 07V434000
ON CERTAIN SPORT UTILITY VEHICLES, THE SOFTWARE PROGRAMMED INTO THE ABS ELECTRONIC CONTROL MODULE MAY ALLOW A MOMENTARY DELAY IN BRAKING WHEN COASTING UP A HILL DURING CERTAIN CONDITIONS.
- Recall consequence
- THIS COULD CAUSE A CRASH WITHOUT WARNING.
- Recall action
- DEALERS WILL REPROGRAM THE ABS ELECTRONIC CONTROL MODULE WITH NEW SOFTWARE THAT PREVENTS THIS CONDITION FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING OCTOBER 2007. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
-
Prev - 1
-
Next