Skip to main content

2000 Toyota Camry Recalls

NHTSA safety recall results (3)

Recall information provided by National Highway Traffic Safety Administration

Component not known

Recall date
Recall no.
00V252

Certain passenger vehicles and light duty pickup trucks fitted with speed control devices at Gulf States Toyota's Vehicle Processing Center or installed by certain Toyota dealers in Gulf States' region (Arkansas, Louisiana, Mississippi, Oklahoma, and Texas) are equipped with an E-clip, which holds the speed control assembly to the accelerator linkage, that could break. If the E-clip fails, the speed control attachment could come off, causing the speed control to stop working. The loose attachment could cause the accelerator to stick, preventing normal stopping and handling of the vehicle.

Recall consequence
Recall action
Gulf States' dealers will replace the E-clip with a cotter pin. The manufacturer has reported that owner notification began during September 2000. Owners who do not receive the free remedy within a reasonable time should contact Gulf States at 1-800-444-1074.

Component not known

Recall date
Recall no.
01V012

On certain passenger vehicles built at Toyota's Kentucky plant, the accelerator cable housing could be deformed at the cruise control actuator-to-throttle body connection. The accelerator inner-cable could wear away and eventually break, allowing the throttle to return to idle or remain in its most recent position regardless of accelerator pedal operation. This could increase the risk of a crash.

Recall consequence
Recall action
Dealers will replace the accelerator cable. The manufacturer has reported that owner notification was to begin during February 2001. Owners who do not receive the free remedy within a reasonable time should contact Toyota at 1-800-331-4331.

Suspension

Recall date
2000-06-05
Recall no.
00V154000

VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO IMPROPER HEAT TREATMENT, THE REAR AXLE MAY NOT HAVE ADEQUATE STRENGTH IN SOME AREAS.

Recall consequence
AFTER EXTENDED USE OF THE VEHICLE, THE REAR AXLE SHAFTS COULD FAIL OR BREAK.
Recall action
DEALERS WILL INSPECT AND REPLACE THE REAR AXLE HUB ASSEMBLIES.
  • Prev
  • 1
  • Next